They did a great job wrapping all four of our vehicles and our trailer. They are now our go to guys for wrapping our trucks.
HVAC Vehicle Wraps
HVAC Vehicle Wraps: Van Wraps and Truck Wraps for DFW Heating and Cooling Companies
Quick answer: 1st Class Graphics designs, prints, and installs HVAC vehicle wraps in-house in Mansfield, TX for heating and cooling companies across Dallas-Fort Worth. Under 16 TAC 75.71, your license number and company name go on both sides of work vehicles in letters 2 inches or taller.
Why Are HVAC Company Vehicle Wraps Important?
HVAC van wraps and HVAC truck wraps are important because they carry a requirement most ads don’t: under 16 TAC 75.71, air conditioning and refrigeration contracting companies must show their license number and company name, in letters at least 2 inches high, on both sides of their work vehicles. HVAC work brings its own equipment problem on top of that.
Most HVAC vans and trucks carry ladder racks, refrigerant tanks, and sometimes small trailers for hauling condenser units, which means there’s less clean, uninterrupted panel space to work with than on a typical service van. A wrap has to account for all of that from the start, placing your license number, business name, and phone number where they stay legible around the equipment your techs actually load and unload every single day, not just where they’d look best on an empty vehicle in a showroom. If you run more than one vehicle, we build the design as a template so every van and pickup in the fleet matches, whether they are wrapped together or added a season at a time. It’s also worth thinking about how the truck looks after a full day of work, dust on the tailgate, grease on a handle, a wrap that’s designed around realistic wear holds up better over the life of the vehicle than one designed only around a clean showroom photo.
How Do HVAC Wraps Pay for Themselves?
A full system replacement is one of the larger jobs a homeowner pays for, which means a single job earned because someone recognized your truck from around the neighborhood can go a long way toward covering the cost of the wrap. That math works differently than it does for a lot of other trades, HVAC has a high enough average ticket that the wrap doesn’t need to generate constant volume to justify itself, it just needs to land the right call at the right moment. And because HVAC demand spikes hard during the first real heat wave or cold snap of the season, a wrapped truck sitting in a driveway during that window gets seen by every neighbor whose own system might be next, right when they’re primed to start looking for someone to call.
How Does a Wrapped Fleet Build Trust During Peak Season?
A matching wrap on every truck shows homeowners that each tech who pulls up belongs to your company, even when you add help during peak season. When it’s a hundred and five degrees outside and half the neighborhood’s air conditioning is failing at once, HVAC companies often bring on extra help fast, temp techs, subcontractors, or additional trucks that weren’t part of the fleet a month earlier. A homeowner calling during that kind of surge has no easy way to tell your actual company from someone loosely affiliated with it, and that uncertainty costs trust exactly when a company needs it most. A consistently wrapped fleet solves this cleanly, every truck that shows up looks like it belongs to the same established business, whether it’s your longest tenured technician or a new hire added for the season. That consistency also means new trucks can be wrapped quickly using the same template rather than designed from scratch mid-summer when there’s no time to spare.
What Was a Recent HVAC Van Wrap Project?
We recently completed a van wrap for NewRise Heating & Cooling on a Ford Transit. The front of the van is orange with a halftone dot pattern, and the side panel is blue with a mascot lion in overalls holding a wrench. The company logo, a sun with a snowflake at its center, sits beside the mascot with the tagline underneath, and an emergency service badge sits at the rear corner. The license number is lettered on the front fender, and the phone number and web address are on the door. The mascot and tagline give the van a friendly face, while the license number and phone number stay readable. We designed, printed, and installed the wrap in-house.
HVAC Van and Truck Wrap Design Ideas
What Should You Plan Before You Wrap?
Manufacturer Dealer Status
Whether you hold dealer status with a manufacturer and want it included as a trust signal.
Certification Callouts
Whether your techs' EPA refrigerant handling certification or other credentials are worth including on the design.
Two-Season Design
Whether the wrap needs to work equally well promoting AC repair in summer and heating service in winter, or lean toward one.
Financing and Promo Messaging
Whether current financing offers or system replacement promotions should be part of the wrap, and how often that messaging is likely to change.
HVAC vehicles carry more mounted equipment than most service trucks, which changes how a wrap needs to be planned from the start. A few specifics are worth working through before your first truck gets wrapped, especially if you’re likely to add vehicles once your busy season hits. It also helps to think a step ahead, past this first truck, to what your fleet might look like in a year or two, since a design built with growth in mind saves you from redesigning everything from scratch the moment you add a second or third vehicle. None of this needs to be fully decided before we talk, but having even rough answers ready tends to speed up the design process once we get started. Companies that also handle plumbing can see our plumbing vehicle wraps page, and owners who want factory paint to show can compare a partial vehicle wrap with a full vehicle wrap.
TESTIMONIALS
How Does Our Wrap Process Work?
Design
Let us help bring your ideas to life through great design and strategic thinking.
We offer both print and production services.
INSTALL
We offer install services both on and offsite for material that we may or may not have produced.
Which Areas Do We Serve?
1st Class Graphics provides vehicle wraps, fleet wraps, commercial vehicle wraps and more to businesses throughout the Dallas-Fort Worth metroplex. Headquartered in Mansfield, TX, our shop offers professional design, printing, and installation serving customers across the DFW area.
Frequently Asked Questions
Do you design around TDLR license number display requirements?
Yes, we place your license number where it stays clearly legible and isn’t blocked by ladder racks, refrigerant tanks, or other equipment mounted on your vehicle.
Can you work around refrigerant tanks and condenser equipment on my truck?
Yes, we design the layout around whatever equipment is already mounted, so nothing gets blocked, cut awkwardly, or damaged during install.
Can you wrap a new truck quickly if I add one during busy season?
Yes, once we’ve built your design template, wrapping an additional truck goes faster since the design work is already done, we’re applying an established look rather than starting over.
Does a wrap actually generate enough leads to be worth it for HVAC specifically?
It can, because a wrap puts a readable company name and phone number in front of the homeowners around every job you run. Your van sits in a driveway for the length of each call and passes the same neighborhoods again on later routes, so neighbors see it more than once. When their own system fails, your number is one they have already seen. To check it, ask every new caller how they found you.
How long does an HVAC vehicle wrap hold up in Texas heat?
A properly installed and maintained wrap typically lasts several years with normal use, even with regular exposure to direct sun and daily driving through the summer months.
What does Texas require on an HVAC truck or van?
Texas rule 16 TAC 75.71 requires air conditioning and refrigeration contractors to put their license number and company name on both sides of every work vehicle, in letters at least 2 inches high. We size that lettering to meet the rule and place it where ladder racks and tanks will not cover it. Confirm any other requirements with TDLR.
Can our vans and pickups share one wrap design?
Yes, we build one HVAC design as a template and adapt it to each body style, so a Transit and a pickup read as the same company. The logo, license number, and phone number hold the same relative spots while the shapes stretch or shrink to fit each panel. During peak season, that match helps homeowners recognize a new tech’s truck as yours.
What do you need from me to quote an HVAC wrap?
We need the year, make, and model of each vehicle, photos from every side with tanks and racks in place, and your logo files. Include the license number and company name the state requires, plus any manufacturer dealer status or promotions you want shown. The free quote form takes all of it, and (469) 335-2949 works if you would rather talk it through.
Let's Get Started
Tell us what you need, we'll design it, wrap it, and make it yours.
Give Us A Call!
