Design
Let us help bring your ideas to life through great design and strategic thinking.
We offer both print and production services.
INSTALL
We offer install services both on and offsite for material that we may or may not have produced.
Burleson Vehicle Wraps
Professional Vehicle Wraps in Burleson, TX That Get Noticed
Quick answer: Yes, 1st Class Graphics does vehicle wraps for Burleson businesses. Our shop is in Mansfield at 2433 FM 917, about 14 miles and 23 minutes east of Burleson. We wrap builders’ trucks for the new subdivisions, landscaping trailers, and delivery vans running the I-35W corridor. Get a free quote for your vehicle.
Where Do Burleson Work Vehicles Drive?
Burleson sits on the Tarrant and Johnson county line, fourteen miles south of Fort Worth on I-35W, and the vehicles here run in both directions: north to Fort Worth for supplies and customers, south toward Cleburne and the newest subdivisions.
Our shop at 2433 FM 917 in Mansfield is about 14 miles from Burleson, roughly a 23-minute drive, so dropping a vehicle off is an easy errand. We design, print, and install every wrap ourselves. A full wrap covers the whole vehicle, a partial wrap stretches a smaller budget by covering the doors, tailgate, or rear panel, and a fleet program keeps several vehicles matched as your company adds trucks one at a time. Send us the vehicle and your logo files, and you will see a digital mockup before anything goes to print.
Which Burleson Businesses Use Vehicle Wraps?
Most of our Burleson wraps go on vehicles for building trades, landscapers, and delivery companies that follow the city’s new construction. The Texas State Historical Association lists 36,690 Burleson residents in 2010 and 47,641 in 2020, close to a 30 percent gain in ten years, and the city’s economic development corporation promotes Highpoint Business Park, Old Town, and more than 650,000 workers within a 25-minute drive. For a wrap shop, that growth shows up as trucks: framers, landscapers, and the service companies that follow new houses. We wrap commercial vehicles for mixed work, HVAC vans, plumber vans, electrician trucks, and roofing trucks that spend their days in new subdivisions and in the older streets around Old Town. A truck in front of a house, with a phone number readable from the curb, can be the first ad a new neighbor sees for that trade.
Why Does Vehicle Wrap Advertising Work in Burleson?
Burleson’s place on I-35W gives local vehicles a long daily reach. Fort Worth is fourteen miles north, so a service van based here can cover a Burleson route in the morning and a Fort Worth job in the afternoon, and the wrap is seen on the interstate in between. The economic development corporation calls the city part of the NAFTA corridor, so freight and service traffic share the same highway. We wrap vans for route and service work, trailers that sit at building sites and in yards, and contractor trucks. Trailers earn their keep in a city with this much building: a wrapped trailer left on a site tells the neighbors, and every supplier who drives past, who is working there.
Vehicle Wrap Design Ideas for Burleson Businesses
What Kinds of Burleson Vehicles Get Wrapped?
Framing and building trucks working new subdivisions off I-35W
Landscaping trailers and mowers kept busy at finished properties
Delivery and freight vans running the I-35W corridor to Fort Worth
Realtor and property service vehicles that need a clean, branded look
New construction decides what comes through our shop from Burleson: building trades, landscapers, and delivery vehicles that follow the same streets as the moving trucks. Because those crews change job sites often, a wrap has to read quickly and travel well. Tell us which sites your trucks work, and we will plan the layout around how people will actually see them. Builders working the new subdivisions can start with our truck wraps page, freight vans on I-35W with box truck wraps, and realtors who drive their own car with custom car wraps.
How Does Our Wrap Process Work?
Which Areas Do We Serve?
1st Class Graphics provides vehicle wraps, fleet wraps, commercial vehicle wraps and more to businesses throughout the Dallas-Fort Worth metroplex. Headquartered in Mansfield, TX, our shop offers professional design, printing, and installation serving customers across the DFW area. Burleson’s neighbor to the northwest has its own page too: vehicle wraps in Crowley.
How Far Is Our Mansfield Shop from Burleson?
From Burleson, our shop at 2433 FM 917, Mansfield, TX 76063 is about 14 miles east, a drive of roughly 23 minutes. We’re open Monday through Friday, 9 AM to 5 PM.
From Central Burleson (Renfro Street)
Take W Renfro Street out of town for about 4.6 miles, then turn left onto County Road 528. After 3.5 miles, turn right onto FM 2738 and stay on it for 2.4 miles. A short jog left on George Renfro Drive and right on Becky Drive puts you on FM 917; turn left and the shop is on the right in under 3 miles. Staying on FM 917 the whole way also works and takes about 26 minutes.
Call ahead at (469) 335-2949 and we’ll be ready for you when you pull up.
Frequently Asked Questions
When is the best time to wrap a truck for a growing company in Burleson?
Earlier is usually better, because a wrap starts working the first day it is on the road and the benefit adds up every week after. If a busy season is coming, plan the wrap before it starts so your truck is not off the road during your best weeks. Call us with your date.
Do I get to see the design before it is printed?
Yes. We provide a digital mockup for your approval before anything goes to print, so you see the finished look on your vehicle type and can ask for changes first. Send your logo, colors, phone number, and the one message you want people to remember, and we will build from those.
Can I start with one truck and add matching vehicles later?
Yes. We can build the design as a template that scales to more vehicles later, which suits companies adding trucks one at a time as they grow. Keeping one layout across the fleet makes your vehicles easier to recognize, and it makes each later wrap easier to match.
Will dust and mud from construction sites hurt a wrap?
Regular washing handles ordinary construction site dust and mud, which is not meaningfully different from normal road grime. Wash by hand when you can, keep a pressure washer away from edges and seams, and check the wrap after any rough job so a small lift can be fixed early.
Do you install at my location in Burleson?
On-site installation is offered, and Burleson is about 14 miles from our shop, so ask when you request your quote and we will tell you what is possible for your vehicle. Most customers simply drop off at 2433 FM 917 in Mansfield, Monday through Friday, 9 AM to 5 PM.
How long is the drive from Burleson to your shop?
Plan on about 23 minutes for the roughly 14 miles between Burleson and 2433 FM 917, where our Mansfield shop sits. From central Burleson, W Renfro Street, County Road 528, and FM 2738 lead to FM 917, or you can stay on FM 917 the whole way, which takes a few minutes longer.
How should a Burleson contractor brand trucks and trailers together?
Use one design across the truck and the trailer, so the name, colors, and phone number match whether the rig is moving or the trailer is parked alone. In a city building as fast as Burleson, a wrapped trailer parked at a build tells neighbors and passing suppliers who is doing the work. We size the trailer’s lettering to read from the street.
Is there a veteran-owned wrap shop near Burleson?
Yes, 1st Class Graphics is veteran-owned and sits about 14 miles from Burleson at 2433 FM 917 in Mansfield. We have designed, printed, and installed wraps in-house for more than 10 years, and customers have given us 4.7 stars in 100+ Google reviews. Call (469) 335-2949 to talk about your truck.
Let's Get Started
Tell us what you need, we'll design it, wrap it, and make it yours.
Give Us A Call!
